Waldent Maxcure 3 Light Cure Unit

Features

Curing Light Mode Applications
FULL : For general applications
PULSE : For more gentle processing, designed for reducing the shrinkage of composite
RAMP : First 0-5 seconds are ramped for more gentle processing,designed for patients sensitive to heat


Description
Light cure unit - The Product is suppose to be used in hospital and dental clinic,should be used by trained qualified dentist.This curing light is used for the principal of ray radiation to solidify the light-sensitive resin by shooting at it in a short time,is used to restore teeth

Key Specifications
Environmental Factors

Operation: 5 C ? 40 C / 30% ? 75% relative humidity / 70 - 106KPa atmospheric pressure
Transportation and Storage: -20 C -  C /10% 93% relative humidity/70 106KPa
atmospheric pressure.
Depth of cure

F.O Light Guide : 8 mm (dia.)
Light Wavelength : 430 - 480nm
Application : General
Full : 1,200mW/cm2?%for 5, 10, 15,,20  seconds
Pulse : 0-1, 200mW/cm2  10%for  5, 10, 15, 20, seconds
Ramp : 1st five seconds from 0-1200mW/cm2% next 5, 10, 15, 20, seconds 1200mW/cm2%
Model: MaxCure3
Power Input: 100-240VAC, 50Hz/60Hz
Power Output: 5V DC/1A
Wave length: 430 nm-480 nm
Light intensity: 0-1200mW/cm 
Battery: 800 mA
 



Packaging
1 x Light Cure Unit
1 x Adapter
1 x light protector
1 x optic probe
1 x Instructions Manual

Direction of use
Installation
A. CHARGING:
Plug the Type-C power cord directly into the curing light handpiece. Once connected,
handpiece display screen will be on and shows CH (charging) during the whole charging
process. When battery is full, charging will stop automatically, and handpiece display screen
shows FU (Full).
B. CURING LIGHT HANDPIECE:

Insert the fibre optic light guide into the curing light handpiece with a TWISTING motion.Ensure the fibre optic guide fits securely into the curing light handpiece.
The battery is not fully charged prior to shipment. Please charge the battery for a minimum of 2 hours prior to the first use.
The curing light circuitry will automatically compensate for power fluctuation during use for a constant light intensity output.
Continually charging the curing light will not affect the life of the battery as it has a built-in safety function that will stop charging the battery when it is full.
The light intensity should be checked regularly with a light intensity meter.

 
Changing Of Settings And Use



Activate the curing light by pressing the ON/OFF or TIME/MODE switch ONCE.
The curing light is preset in the factory to the ?FULL? mode for 10 seconds.
Press and hold the TIME/MODE switch for 2 seconds to change the mode.Press the TIME/MODE switch repeatedly to locate the desired time for the "FULL""PULSE"or "RAMP" mode.
Every start and end of a programme or every change of time or mode,will be signaled with a ?beep?.
The curing light will automatically turn off if it is not in operation for 1 minute. It will keep the last selected programme in memory once restarted.
Put on the disposable curing light sleeve to cover the entire curing light for cross infection control.
Put the protective light shield onto the light guide tip until it is firmly held on the curing light.The curing light is now ready for use.
Press the ON/OFF or TIME/MODE switch to activate the curing light if no indicator light is on.When the preparation for light curing is ready,
FAQs
Q.What is light cure unit?
A.Dental light-curing units are handheld devices that are used for the polymerization of visible light?activated dental materials. The four types of light-curing units that are currently available include quartz-tungsten-halogen (QTH), light-emitting diode (LED), plasma arc curing (PAC), and Argon laser units.
Q.How does light cure work?
A.It uses a high intensity light source, a fluorescent bulb containing plasma, in order to cure the resin-based composite

Warranty

Manufacturer/Importer warranty of 2 Year as applicable for this product.
Service and Warranty are handled by the manufacturer/importer directly for this product
Divne Medicare will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
Divne Medicare and the Buyer acknowledge that the Products purchased/usedare a subject matter of original Manufacturer/Importer?s warranties only
Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Divne Medicare may assist the customer in registering a request to get the Product replaced or serviced. 
The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.