Api Brushless Lab Micromotor Set
SKU : DK-2079
$692,98 Prix original
$297,98Prix promotionnel
Features
Description
Good Quality Api Brushless Lab Micromotor with Handpiece Wire.
INDICATION :
- Widely used in precision grinding, carving and polishing for false teeth, precious stone, jewelry, nails mold handicrafts and so on.
ADVANTAGES :
-
High-Quality Copper.
-
Brushless Handpiece Wire.
-
Best Quality Ball Bearing Set.
-
No Noise Low Vibrator.
-
With human engineering design.
- Do not Run the handpiece without bur.
- When handpiece running, do not try to twist it.
- When changing the bur, make sure the handpiece stop running completely.
- After changing the bur, fasten the chuck completely before operating it again.
- After working do not remove the bur from the handpiece.
- Always chose proper rotating speed as per the above acceptable speed chart.
- Do not always operate the unit at the highest speed.
- Do not overload the unit.
- Before switching off the power, stop the handpiece first.
- Disassembly of the unit is strictly prohibited to avoid serious outcomes.
- 1 x Micromotor with Cord
- 1 x Control Box
- 1 x Foot Pedal
- 1 x Stand
- Connect the handpiece to handpiece port. Connect the foot pedal to foot pedal port if in need.
- Plug in and switch on the power of control box power switch .
- For hand mode operation,press start/pause start.
- For foot mode operation,press foot control and press the foot pedal to run the handpiece.
- Set the speed control knob to desired speed.
- Select the rotation direction by pressing FWD/REW switch.
- Manufacturer/Importer warranty of 1 Year as applicable for this product.
- Service and Warranty are handled by the manufacturer/importer directly for this product
- Divne Medicare will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
- Divne Medicare and the Buyer acknowledge that the Products purchased/usedare a subject matter of original Manufacturer/Importer?s warranties only
- Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Divne Medicare may assist the customer in registering a request to get the Product replaced or serviced.
- The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.
Key Specifications
TECHNICAL SPECIFICATION:
Model | Micro Motor Brushless 803 T 8.5 |
Speed | 50000RPM |
Torque | 8.5 N.cm |
Power | 230 |
Voltage | 201-500 V |
Usage | Clinical |
Brand | API |
NOTE:
Packaging
Direction of use
STEP 1:
STEP 2:
STEP 3:
STEP 4:
STEP 5:
STEP 6: