Being Foshan LED Airotor 401P - B2

Features
Push Button type, easy bur changing
Offers better eyeshot and angle, improving the efficiency
High density cartridge, with high cutting efficiency but less vibration and noise
Newly-designed handle, comfortable to hold and easy to clean
Autoclavable handpiece

Description
Being Foshan LED Airotor 401P-B2 

Key Specifications
TECHNICAL SPECIFICATIONS:



AIR PRESSURE
180-250 KPa (1.8-2.5 kgf / cm2)


GAS CONSUMPTION
=1.5L/min.


NOISE
=70dB


ROTATION RANGE
380,000- 450,000rpm


COOLING WATER PRESSURE
0.2MPa


MAX. LENGTH OF NON-ROTATION PART
13.14mm


HANDPIECE HEAD DIAMETER
 11.2mm


COMPATIBLE DIAMOND BUR
ISO1797-1 Type 3  1.59-1.6mm


COMPATIBLE DIAMOND BUR LENGTH
21mm-23mm


HANDPIECE CONNECT METHOD
ISO 9168, YY/T 0514


TORQUE PARAMETER
=0.016Nm



STERILIZATION:

Bruss off excess dirt & wipe clean with alcohol-soaked cloth.
Insert the handpiece in a sterilization pouch & seal it.
Autoclavable up to max.134 C after high temperature sterilization & disinfection.
Handpiece is resistant to at least 250 times of high temperature sterilization & disinfection.

LUBRICATION:

Use oil spray or other standard oil spray after each use and/or before autoclaving.

Packaging
1 x Airotor Handpiece

Warranty

Manufacturer/Importer warranty of 3 months as applicable for this product.
Service and Warranty are handled by the manufacturer/importer directly for this product
Divne Medicare will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
Divne Medicare and the Buyer acknowledge that the Products purchased/usedare a subject matter of original Manufacturer/Importer?s warranties only
Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Divne Medicare may assist the customer in registering a request to get the Product replaced or serviced. 
The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.